Cleaning Chemicals 

There are 169 products.

Subcategories

Emulsion developed for the coating of the working side of NR and NBR gloves.It is a high performance polymer, which will smoothen and eliminate tackiness on rubber surface. – Prevent surface delamination and ensure less flaking.– Able to produce powder free gloves.– To replace offline chlorination (Environmental friendly) and prevent sticky problem.–...

Superkleen FC2 is specially developed caustic free chlorinated alkaline stain remover cleaner. It’s not corrosive to ceramic at high contact time, concentration and temperature. Superkleen FC2 works well on stearate stain and protein stain from ceramic former in conjunction with Superkleen AC series. – Safe on ceramic, porcelain and glass surfaces.–...

Superkleen FC18 is a specally formulated alkaline former cleaner to clean the heavy stain build up on ceramic formers. Mild and non-corrosive to ceramic formers and metal surface. Works well on powder-free coagulant stains. – Can be used on powdered and powder free coagulant on–line programme.– Able to minimize former damage.– Reduce cleaning time and...

Avertec PW6 is a unique powder reduce agent blended with low foam property, used for the manufacture of low powder latex glove. Reduce corn starch to produce lightly powdered glove with superior feel & comfort. Eliminates the uncomfortable feeling of powder on hands after wearing the gloves. – Safe to use.– Easy to handle & prepare.– Enhance good feel...

Superkleen AC20 is a product with unique blend of organic & inorganic acid which results in low acidity. It outperforms the conventional acid cleaner on conditioning stearate stain from ceramic former – Reduce equipment & infrastructure wear and tear.– Safe to handle.– Reduce health hazard.– Lower cleaning cost.– Maintain former cleanliness. – Liquid...

Non-chlorinated alkaline former cleaner to clean the heavy stain build up on ceramic formers. This product is mild and non-corrosive to ceramic formers and metal surface. Works well on powder-free coagulant stains. – No corrosion on metal surface.– Low dosage. Cost saving. – Liquid Form– Odour: Slightly pungent– pH: Alkaline Available in:: 220KG |...

Avertec PR3 is a protein reduce agent to be used in the pre-leach and post-leach tank during on line application. Effective solution to high protein level on gloves as it provides aid in reducing the protein level on gloves. Facilitates the leaching efficiency in reducing the extractable protein (EP) content in the latex products. – Facilitates in...

Superkleen AC4 is a specially designed acid cleaner for the removal of calcium carbonate powder, heavy baked latex and inorganic deposits from ceramic formers. Suitable for use with powder free coagulant where it conditions the stearate stains. – Safe to use. Does not harm stainless steel, ceramic, porcelain and glass surfaces even in neat form. Does...

Non-chlorinated alkaline former cleaner to clean the heavy stain build up on ceramic formers. This product is mild and non-corrosive to ceramic formers and metal surface. Works well on powder-free coagulant stains. – Low corrosion on former surface.– Reduce cleaning time and eliminate manual scrubbing.– Consumption saving. – Liquid Form– Odour:...

Specially designed acid cleaner for the removal of calcium carbonate powder, heavy baked latex and inorganic deposits from ceramic formers. Enhanced with effective cleaning performance on rubber and protein stain. It is safe on ceramic, porcelain and glass surface. – Safe to use.– More economical than nitric acid.– Reduce cleaning time and eliminate...

Superkleen FC4 is a specially formulated chlorinated alkaline former cleaner to clean the heavy stain build up on ceramic formers. Works well on powderfree coagulant stains and is designed to be used ON-LINE in conjunction with Superkleen AC series. – Able to minimize former damage.– Economical.– Reduce cleaning time and eliminate manual scrubbing. –...

Special formulated of potassium stearate based powderless coagulant. Produce powder free gloves in conjunction with on line chlorination or polymer coating. – No tacky and gives clean feel.– No line modification required. Can be used on any production line.– Faster cleaning and no brushing required.– Dispersion is stable, no separation. – Liquid Form–...